Certificación
De buena calidad reja serrada galvanizada para las ventas
Mi rejilla vino hoy y cupo perfectamente. Gracias. ¡Déjeme saber si hay dondequiera que puedo dejar retroalimentación positiva sobre su compañía!

—— Andrew Mullen

Estoy en línea para chatear ahora

clips de la silla de montar de la reja de la barra

La silla de montar de alta resistencia de la reja de la barra de acero acorta el tipo resistente tres del vándalo opcional

  • La silla de montar de alta resistencia de la reja de la barra de acero acorta el tipo resistente tres del vándalo opcional
  • La silla de montar de alta resistencia de la reja de la barra de acero acorta el tipo resistente tres del vándalo opcional
Datos del producto:

High strength vandal resistant best quality steel grating clamp

Introduction of steel grating clamp

It's a series of metal bars positioned vertically,placed an equal distance apart and joined by cross members to form a rectangular or reticuline pattern.

1. Material

mild carbon steel,stainless steel,aluminum

2. Bearing bar

It's the vertically positioned bars.

 

Size:from 3/4"×1/8" to 7"×1/2"

Bearing bar pitch: from 15/16" to 38/16"

3. Cross bar

Used to secure the position of the bearing bars.

Cross bar pitch: 2" or 4"

4. Optional surface

Plain surface

Serrated surface

Surface Treatment:Untreated, Painting or Hot dip Galvanizing

G - galvanized(Hot dip galvanized, Cold dip galvanized)

P - painted(Painted, Powder coated)

U - untreate

Steel Grating standard:
China: YB/T4001.1-2007(YB/T4001.1-1998)
Britain: BS4592-1:1995
US: ANSI/NAAMM(MBG531-93)
Australia: AS1657-1992

Charaterristics:The installation has the advantages of simple construction, light weight, good impact resistance, good bearing capacity ability,rather large water displacement characteristics, corrosion and rust resistance.

Feature of steel grating clamp

1.Optimum water draining: Water leakage area reaches 83.3%,which is more than two times larger than that of cast iron.

2.Hot-dip galvanizing: Good antirust performance,maintenance free and replacement free.

3.High strength: With strength and toughness far higher than those of cast iron,it can be used in the environment with large span and heavy load,such as the wharf and the airport.

Type of steel grating saddle clip Applicable for bearing bar space
A-30 B-30 C-30 (Bearing bar pitch) 30mm
A-40 B-40 C-40 (Bearing bar pitch) 40mm
A-60 B-60 C-60 (Bearing bar pitch) 60mm
em steel grating clamp
Bearing Bar 3/4"x1/8"to 7"x1/2"
Bearing Bar Pitch 15/16" to 38/16"
Cross Bar Pitch 2" or 4"
Surface plain,serrated
Size (mm) Weight kg/m2 Size(mm) Weight kg/m2
255/30/50 54.1 255/30/100 45.8
325/30/50 64.6 325/30/100 56.2
355/30/50 69.1 355/30/100 60.7
405/30/50 76.6 405/30/100 68.2
455/30/50 84.0 455/30/100 75.7
505/30/50 91.5 505/30/100 83.2
555/30/50 99.0 555/30/100 90.7
605/30/50 106.5 605/30/100 98.3
655/30/50 114.0 655/30/100 105.7
Size(mm) Weight kg/m2 Size(mm) Weight kg/m2
255/40/50 45.8 255/40/100 37.4
325/40/50 53.9 325/40/100 45.6
355/40/50 57.4 355/40/100 49.1
405/40/50 63.2 405/40/100 54.9
455/40/50 69.1 455/40/100 60.7
505/40/50 74.9 505/40/100 66.6
555/40/50 90.7 555/40/100 72.4
605/40/50 86.5 605/40/100 78.2
655/40/50 92.4 655/40/100 84.0

La silla de montar inoxidable de la reja de la barra de acero acorta la sujeción de clips de rejilla de acero galvanizada de J/de M

  • La silla de montar inoxidable de la reja de la barra de acero acorta la sujeción de clips de rejilla de acero galvanizada de J/de M
  • La silla de montar inoxidable de la reja de la barra de acero acorta la sujeción de clips de rejilla de acero galvanizada de J/de M
Datos del producto:

Galvanised steel grating clips fastener Stainless Steel Grating Clips

Stai Stainless Steel Grating Clips & Fasteners

  • “J” Clips
    - Hold a single bar and are nearly the same height as the grating
    - These clips can be pulled down completely to the support under the grating
    - Grating Thicknesses 5/8” 1” 1 ½” and 2”
  •  
  • “M” Clips (saddle clips)
    - Hold two bars and can be used to snug the grating to the support.
    - For Molded bar spacing @ 1” 1 ½”narrow 1 ½”wide and 2”
    - Clips for Pultruded Grating thicknesses from 1” 1 ½ “ and 2”
  •  
  • EPC (end panel clips)
    - Used to hold two separate pieces of grating, or two separate panels of grating
    - These should be used where a grating seam crosses a walking path and there is no support immediately under that seam
    - EPC Clips are offered for grating thicknesses of: 1”, 1 ½”, and 2”

 

Application: Attaches grating to structure

Contract Catalog Item:Y

Distance Between Grating Bars:1-1/2"

Expanded Catalog Item:Y

Finish:Galvanized or stainless steel

Grating Bar Depth:2-3/4"

Grating Bar Width:7/8"

Material:Steel

Model Compatibility:Bar Grating, 1-3/16" on Center, 1-1/2" Tall

Style:Mechanical Clamp

Type:Grating G-Clip

Product Weight:9 lbs.

Applications:Attaches Grating to Structure

Notes:Quick Install, Work Done Above Grating, No Damage to Structures

 

Types of fixing clips:

 

* Type A - comprising a top clip with double saddle, a lower clip with teeth and a M10 (or M8)
* Type B - comprising a top clip with double saddle (of which one saddle can secure the two bearing bars of adjacent panels), a lower clip with teeth and a M10 (or M8)
* Type C - comprising a top clip with double saddle and a M10 (or M8)

product code screw dia (mm) grating width (mm) grating depth (mm)
min max max
GRAT 1G08 M08 30 41 50

Technical Data

product code material/finish screw
dia
body
width (mm)
tightening
torque (Nm)
GF3 S08 ASSY 304 stainless steel M08 0.625 8
GF1 G10 ASSY galvanised malleable iron M10 0.750 5

La silla de montar moldeada RP de la reja de la barra de la reja acorta/las asambleas del clip del acero inoxidable M

  • La silla de montar moldeada RP de la reja de la barra de la reja acorta/las asambleas del clip del acero inoxidable M
Datos del producto:

La reja moldeada FRP inoxidable de los clips del acero M utilizó los clips de la silla de montar del metal

 

Los accesorios de rejilla populares están disponibles de los metales de P&R. No hay trabajo de rejilla completo sin los clips, las placas, los pernos y los asientos necesarios. Llevamos los accesorios especializados para nuestra reja de la barra.

Las barras del control dos de los clips de “M” y se pueden utilizar cómodamente a la reja a la ayuda. Debido a las capacidades que se sostienen adicionales, éstas se recomiendan específicamente para las pisadas de escalera. Las pisadas de escalera deben tener un mínimo de cuatro clips en cada pisada.

 

1. M-tipo de tipo standard, L-tipo, C, W-tipo, J-tipo y G-tipo

2. Tenemos acción para de tipo standard del clip
3. material: Galvanizado, SS201 SS 304, SS316L
4. producción bajo control de calidad del ISO 9001

5. Las muestras libres pueden ser proporcionadas.

6. Pago: T/T, Western Union

7. Paquete de la caja del cartón

8. entrega de 7 días

 

Cuando la perforación del miembro de la ayuda tiene que ser evitada, el J-tipo clip ofrece la solución. El J-clip podía estar con rallar la perforación rectangular con una nuez cuadrada, nosotros podía apretar el perno del top de la reja. Un clip superior más pesado entonces termina a la asamblea para llevar las cargas. El clip proporciona la capacidad que se sostiene bidireccional excelente para la reja cuadrada moldeada de la fibra de vidrio de la malla

Sujeciones/asambleas del clip para los productos de la fibra de vidrio:

Los clips se pueden utilizar para asegurar la reja o la placa a la estructura portante o para sujetar los paneles adyacentes de las rejas para minimizar la desviación diferenciada inducida carga. El máximo recomendó el espaciamiento del clip es 48 pulgadas en centro con un mínimo de cuatro (4) clips por el pedazo de reja.

 

Uso

 

Plantas químicas y petroquímicas

Plantas de la comida y de la bebida

Aceite y gas, aparejo costero y centrales eléctricas

Depuradoras y piscinas de agua

Rampa, andamio, sendero ferroviario

Plataformas y cubiertas de funcionamiento del foso

Calzadas, pasarelas y escalera

Arquitectura y sector de la construcción

Densamente (milímetros)
Tamaño de malla (milímetro)
Tamaño del panel (milímetros)
Zona abierta (%)
Peso (kg/m2)
25


38*38

1220*2440
2440*3660
65
12,5
30
68
15,5
38
68
19,5
30

19*19/(superior) (parte inferior) 38*38
1220*2440
2440*3660
30
20
38
30
24

 

Artículo

Grueso

milímetro

Tamaño de malla

mmxmm

Tamaño del panel

mmxmm

Peso

kg/Square Meter

01 15 38x38 1223x3660 7
02 15 50x50 1223x3660 6,5
03 25 25x100 1010x3010 12,4
04 25 19x19 1223x3660 12,5
05 30 19x19 1223x3660 21,5
06 30 38x38 1223x4040 15,1
07 38 19x19 1223x3660 22,8
08 38 38x38 1000x4040 19,5
09 38 38x38 1223x3660 19,5
10 40 40x40 1250x3690 19,3
11 50 50x50 1223x3660 21,5

 

La silla de montar con poco carbono de la reja de la barra de acero acorta el tipo un tipo C grueso de 3m m/de 4m m

  • La silla de montar con poco carbono de la reja de la barra de acero acorta el tipo un tipo C grueso de 3m m/de 4m m
Datos del producto:

Steel grating clamps fastener used in construction type A type c

 

Steel grating clamp for platform

  • Material of steel grating clamp: Low Carbon Steel then galvanized
  • Fabricating Method: The press welded steel grating, requested by the customers, is made of load flat steel

bar and cross rods, placed, horizontally and vertically, and at an equal pitch apart, by welding with 200-ton

hydraulic resistance automatic welding equipment, then cutting, punching and banding ends.

  • Load Bearing Steel Bar Pitch: Pitch between the two neighboring load bearing steel bars is 30mm or 40mm.
  • Cross Rod Pitch: Pitch between two neighboring cross rods is usually 50mm or 100mm.

steel grating clamp specifications

  • Bearing Bar (Load Bar) Specifications (mm):

The specification of plain type and serrated type bearing bar is 20 x 3 to 100 x 10;

the specification of I-section type is 25 x 5 x 3, 32 x 5 x 3, 38 x 5 x 3, 40 x 5 x 3, 50 x 5 x 3, 50 x 7 x 4,

55 x 7 x 4, 60 x 7 x 4, 65 x 7 x 4, 70 x 7 x 4, 75 x 7 x 4, etc.

  • Bearing Bar Pitch (center to center):

America standard is available

1'' x 3/16'', 1 1/4'' x 3/16'', 1-1/2'' x 3/16'', 1'' x 1/4'', 1-1/4'' x 1/4'', 1 1/2'' x 1/4''(19-w-4),(19-w-2) and so on.

  • Cross Bar Pitch (center to center):

38, 50, 76, 100, 101.6mm etc.
50, 100mm are recommended

  • Surface Treatment:

Untreated, Painting or Hot dip Galvanizing

steel grating clamp application:
steel grating clamp are widely used by various plants such as

  • electric power
  • petroleum
  • chemical industry
  • metallurgy industry
  • machinery industry
  • shipbuilding
  • oceanographic engineering
  • building materials
  • paper mills
  • cement plant
  • medicine
  • spinning and weaving
  • foodstuff factory
  • transportation
  • municipal administration
Trade Terms
  • Trade terms: FOB, CFR, CIF, L/C
  • Payment term: 30% T/T in advance 70% against B/L copy
  • MOQ: 100pc
  • Port: Tianjin
  • Sample time: 5-7 days
  • Lead time: 10-30 days (Depend on quantity)
  • Shipment: By sea
steel grating standrd
  steel grating standard steel standard galvanizing standard
China YB/T 4001.1-2007 GB 700-88 GB/T 13912-2002
USA ANSI/NAAMM (MBG531) ASTM (A36) ASTM (A123)
U.K. BS 4592 BS4360 (43A) BS 729
AUS AS 1657 AS 3679 AS 1650
ries Series distance Traverse line distance Load flat specifications (wide×thick)
20×3 25×3 32×3 40×3 20×5 25×5
1 30 100 G203/30/100 G253/30/100 G323/30/100 G403/30/100 G205/30/100 G255/30/100
50 G203/30/50 G253/30/50 G323/30/50 G403/30/50 G205/30/50 G255/30/50
2 40 100 G203/40/100 G253/40/100 G323/40/100 G403/40/100 G205/40/100 G255/40/100
50 G203/40/50 G253/40/50 G323/40/50 G403/40/50 G205/40/50 G255/40/50
3 60 50 - G253/60/50 G253/60/50 G403/60/50 G205/60/50 G255/60/50

 

series Series distance Traverse line distance Load flatspecifications (wide×thick)
32×5 40×5 45×5 50×5 55×5 60×5
1 30 100 G325/30/100 G405/30/100 G455/30/100 G505/30/100 G555/30/100 G605/30/100
50 G325/30/50 G405/30/50 G455/30/50 G505/30/50 G555/30/50 G605/30/50
2 40 100 G325/40/100 G405/40/100 G455/40/100 G505/40/100 G555/40/100 G605/40/100
50 G325/40/50 G405/40/50 G455/40/50 G505/40/50 G555/40/50 G605/40/50
3 60 50 G325/60/50 G405/60/50 G455/60/50 G505/60/50 G555/60/50 G605/60/50

 

El tipo soldado con autógena silla de montar de la reja de la barra de 316L acorta la aprobación del SGS del palmo de 100m m/de 50m m M

  • El tipo soldado con autógena silla de montar de la reja de la barra de 316L acorta la aprobación del SGS del palmo de 100m m/de 50m m M
Datos del producto:

Q235 304 316L welded type 325 steel grating clamp grating clips

 

 

Material of steel clips: Q235 stainless steel 304
  • Machining processes: Metal fabrication, machining, welding, forming, shaping, punching, drilling, milling, grinding, rolling, stamping, deep drawing, bending, welding, etc
  • Size:

    The specification of plain type and serrated type bearing bar is 20 x 3 to 100 x 10;the specification of I-section type is 25 x 5 x 3, 32 x 5 x 3, 38 x 5 x 3, 40 x 5 x 3, 50 x 5 x 3, 50 x 7 x 4, 55 x 7 x 4, 60 x 7 x 4, 65 x 7 x 4, 70 x 7 x 4, 75 x 7 x 4, etc.

    2) Bearing Bar Pitch (center to center):

    12.5, 15,25, 30, 30.16, 32.5, 34, 40, 41.25, 45, 50, 60, 60.32, 80, 100 mm etc, also be according to client's requirement and 30, 40, 60mm are recommended,

    America standard is available <1' x 3/16', 1 1/4' x 3/16', 1-1/2' x 3/16', 1' x 1/4', 1-1/4' x 1/4', 1 1/2' x 1/4'(19-w-4),(19-w-2) and so on.>

    3) Cross Bar Pitch (center to center):

    38, 50, 76, 100, 101.6mm etc, also be according to client's requirement and 50, 100mm are recommended, America standard is available.

  • Surface treatment:galvanizing, powder coating
  • Application:Industry, Electrical industry, Mining industry, mechanical, metals, components for furniture, auto, machines etc.

steel grating clamp Advantage

1, factory direct offer

2, OEM, all with your design

3, tolerance:+/-0.01mm

4, feature:Firm, durable, artistic, devisable and reasonable price

 

Payment Terms

1, T/T 30% deposit, the balance paid against the copy of B/L

2, L/C 100% irrevocable L/C at sight

3, West-Union (small order)

4,PayPal (small order)

 

Contacto
ANPING BAOSHENG WIRE MESH PRODUCTS CO.,LTD

Persona de Contacto: Mr.

Teléfono: 86-311-67902761-8:00

Fax: 86-311-67902762

Envíe su pregunta directamente a nosotros (0 / 3000)